Carbide Tipped, Two Flute Design

This carbide tipped, double flute design is for use on decorative edging and moulding of furniture. Best for use on natural wood, wood composites and plastic.

Part  Number	Cutting Diameter	Cutting Length	Cutting Radius	Shank Length	Canadian Price
1/4" Shank
ST2201	7/8"	9/16"	1/8"	1 1/4"	$27.75
ST2203	15/16"	5/8"	5/32"	1 1/4"	$31.25
ST2205	1 1/8"	3/4"	1/4"	1 1/4"	$39.50
1/2" Shank
ST2251	7/8"	9/16"	1/8"	1 1/2"	$27.75
ST2253	1"	11/16"	3/16"	1 1/2"	$36.50
ST2255	1 1/8"	3/4"	1/4"	1 1/2"	$39.50
ST2257	1 3/8"	1"	3/8"	1 1/2"	$48.75

Carbide Tipped, Two Flute Design

This bit is a two flute, carbide tipped bullnose or half round bit. This can be used to create complete edge rounding along the material.

Part  Number	Cutting Diameter	Large Cutting Length	Small Cutting Length	Shank Length	Canadian Price
1/4" Shank
ST2301	7/8"	5/8"	1/4"	1 1/4"	$21.50
ST2303	1"	3/4"	3/8"	1 1/4"	$26.75
ST2305	1 1/8"	7/8"	1/2"	1 1/4"	$30.25
1/2" Shank
ST2351	7/8"	5/8"	1/4"	1 1/2"	$21.50
ST2353	1"	3/4"	3/8"	1 1/2"	$26.75

Carbide Tipped, Two Flute Design

This bit can be used for decorative edging on moulding and furniture. Best for use on natural wood, wood composites and plastic.

Part  Number	Cutting Diameter	Cutting Length	Cutting Radius	Shank Length	Canadian Price
1/2" Shank
ST2451	7/8"	3/4"	1/8"	1 1/4"	$41.75

Carbide Tipped, Two Flute Design

This bit can be used for decorative edging on moulding and furniture. Best for use on natural wood, wood composites and plastic.

Part  Number	Cutting Diameter	Cutting Length	Cutting Radius	Shank Length	Canadian Price
1/4" Shank
ST2501	7/8"	1"	1/8"	1 1/4"	$46.50
1/2" Shank
ST2551	7/8"	1"	1/8"	1 1/2"	$46.50